Submetering and Allocation Billing Rules in 11 States
Eleven states with rules we could read in the official text: who must meter, when allocation billing is allowed, and which fees are capped. Not legal advice.

Rules for billing residents for utilities are set state by state, and they differ on basic questions. Some states require meters for any usage-based charge. Some allow formula allocation with disclosure. Several cap the fee an owner can add. This report covers 11 states where we read the statute or regulation itself and can link to it.
It does not cover all 50 states, and it is not legal advice. Statutes change, and cities and utility commissions add their own rules. Read the linked text and ask counsel before you launch or change a billing program.
Key findings
- Of the 11 states reviewed, three tie usage-based water or utility charges to a meter in the text we read: Massachusetts (M.G.L. c. 186, s. 22), Delaware (25 Del. C. s. 5312) and North Carolina (G.S. 62-110(g), with a hot-water submeter exception for older buildings).
- Six states put a number on a fee, late charge or rate cap in the text we read. Examples: a service charge of up to 9 percent on submetered water in Texas (16 TAC 24.281), the lesser of $4.75 or 25 percent of the usage charge in California (Civil Code 1954.205), and $1 per unit per month for gas and electric submetering in Maryland (Public Utilities 7-303).
- Texas and California both require unit-level water measurement in newer multifamily buildings. Texas applies it to construction begun after January 1, 2003 (16 TAC 24.277). California applies it to buildings whose water connection application was submitted after January 1, 2018 (Water Code 537.1).
- Rules move. A March 2004 industry summary reprinted in the EPA-funded national submetering study listed Massachusetts as not allowing submetering. The Massachusetts statute now permits it under conditions.
What terms do these rules use?
Submetering means measuring each unit's use with a meter installed behind the utility's master meter, then billing on that reading. Allocation billing, often called a ratio utility billing system or RUBS, divides the master bill by a formula such as occupants or square footage. Master-metered means the utility bills the owner for the whole building on one account.
Most of the rules below deal with one or more of five things: whether the charge must appear in the lease, whether a meter is required, which formulas are allowed, what the owner may add on top of the utility's charge, and who enforces the rule.
What does each state regulate?
| State | What is regulated | Source |
|---|---|---|
| Arizona | Landlords may bill separately for gas, water, wastewater, solid waste or electricity by submeter or by ratio billing. Only the provider's charges plus an administrative fee for actual administrative costs may be billed. The lease must disclose the utilities, the fee and the allocation method. Existing tenancies need 90 days' notice. | A.R.S. 33-1314.01 |
| California | New multiunit residential buildings must measure water to each unit. Where submeters are used, the bill follows the tenant's share of metered use. Billing fees and late fees are capped. The chapter became operative January 1, 2018. | SB 7 (2016), adding Civil Code 1954.201 to 1954.219 and Water Code 537 to 537.5 |
| Delaware | A landlord may not charge separately for a utility unless it is separately metered and the lease provides for it. The charge may not exceed actual cost. Meters must be approved by the Division of Weights and Measures. Charges that are not based on consumption may be apportioned if the total does not exceed actual cost. | 25 Del. C. s. 5312 |
| Illinois | For master-metered utilities, a landlord must give the tenant the allocation formula in writing before demanding payment. Total collections for a billing period may not exceed what the utility charged. The utility bill must be available on request. | 765 ILCS 740/5 |
| Maryland | Gas and electric submetering in apartment houses is subject to Public Service Commission regulations. Owners may pass through only the utility's actual charges, split by each unit's actual use, plus a capped service charge. | Public Utilities Article 7-303 |
| Massachusetts | Water may be billed to a tenant only by submeter, installed by a licensed plumber, with low-flow fixtures in place, a certification filed with the local board of health, and a written agreement. Charging may start only with a new tenancy. No extra billing or meter-reading fees. | M.G.L. c. 186, s. 22 |
| New York | Residential electric submetering needs Public Service Commission authorization where an order is required. Charges are limited by a rate cap set at the local utility's rates for comparable directly metered residential customers. | 16 NYCRR 96.1 and 96.2 |
| North Carolina | Charging tenants for water or sewer requires a written rental agreement and Utilities Commission procedures. Charges are based on metered consumption at no more than the supplier's unit rate. Service may not be cut off for nonpayment. | G.S. 42-42.1 and G.S. 62-110(g) |
| Oregon | A landlord may bill a utility or service charge only if the written rental agreement provides for it. The charge is limited to what the provider billed the landlord. Bills are due to the tenant within 30 days of the provider's bill and must explain how the charge is split. | ORS 90.315 |
| Texas | Owners who bill tenants for submetered or allocated water and wastewater must register with the Public Utility Commission. Charges may include only the retail utility's water and wastewater bills. The rule lists the allocation formulas allowed and sets minimum common-area deductions. | 16 TAC 24.277 and 24.281 |
| Virginia | Energy submetering, energy allocation equipment, water and sewer submetering and ratio utility billing may be used in a residential building if clearly stated in the lease. Billing periods, service charges, late charges and tenant access to records are addressed. | Va. Code 55.1-1212 |
Where are fees and formulas limited?
The table below records the numeric limits and the treatment of formula allocation in the text we read. A blank does not mean there is no limit. It means the cited section does not state one.
| State | Limit on what the owner may add | Allocation without unit meters |
|---|---|---|
| Arizona | Administrative fee limited to actual administrative costs | Allowed by listed methods: per tenant, square footage, unit type, fixtures, submetered hot water, or another fair method described in the lease |
| California | Billing fee is the lesser of $4.75 or 25 percent of the usage charge, adjustable by CPI. Late fee up to $7 on the first unpaid bill and $10 after | The chapter governs submetered billing. We did not review rules for buildings without submeters |
| Delaware | No more than actual cost | Not allowed for consumption-based utilities. Allowed for charges not based on consumption |
| Illinois | Total collected may not exceed the utility's bill | Allowed with a written formula |
| Maryland | Service charge up to $1 per unit per month (gas and electric) | The section covers submetering. Charges are split by actual use |
| Massachusetts | No added servicing, meter-reading, billing or submetering fees | The section ties any water charge to a submeter or a utility meter serving only that unit |
| New York | Rate cap at the utility's residential rates. The cap can be cut by up to 40 percent for violations | Part 96 covers electric submetering only |
| North Carolina | Administrative fee up to the maximum the Utilities Commission authorizes | Ratio billing is prohibited unless based on individually submetered hot water, an option for contiguous units built before 1989 |
| Oregon | No markup on utilities. Up to 10 percent on cable, satellite or internet under conditions | Allowed. The bill or lease must explain how the charge is apportioned |
| Texas | Service charge up to 9 percent of the tenant's submetered water and wastewater charge. Not allowed for tax credit units or Section 8 voucher tenants | Allowed by listed formulas after deducting common-area use: at least 25 percent where common areas and irrigation are unmetered, at least 5 percent in the other unmetered cases |
| Virginia | Service charges for actual administrative and billing costs if agreed in the lease. Late charge up to $5 | Allowed if clearly stated in the lease |
What do the stricter states have in common?
Massachusetts, Delaware and North Carolina start from the meter. In those states the text we read ties a usage charge to a reading. Massachusetts goes further and requires efficient fixtures before the first bill, which matches the national study's advice to upgrade fixtures before changing how residents are billed.
Texas takes a different route. It permits allocation and regulates the arithmetic. The rule fixes an occupancy scale (1 for one occupant, 1.6 for two, 2.2 for three, plus 0.4 for each additional occupant), a bedroom scale, and a ceiling of 50 percent on the square-footage weight in a blended formula. An owner using any other method must switch to a listed one, install submeters, or stop billing.
What do almost all of them require?
Three requirements recur across the 11 states.
- Put it in the lease. Arizona, Delaware, North Carolina, Oregon, Virginia and Massachusetts all condition the charge on the written rental agreement.
- Do not profit on the commodity. Delaware, Illinois, Maryland, Oregon, Texas and North Carolina each limit the charge to what the utility billed or to the utility's own rate.
- Show your work. Arizona specifies what a bill must show, including meter readings and the administrative fee. Illinois and Oregon give tenants access to the underlying utility bill. Texas requires owners to keep the rate structure, bills and billing formula available for inspection.
Penalties can be material. In Oregon a tenant charged in violation of the section may recover one month's rent or twice the amount wrongfully charged, whichever is greater.
What does this report leave out?
- Thirty-nine states and the District of Columbia. We left out any state where we could not open the official statute or regulation and read the section. That includes states with well-known rules, such as Georgia, Washington, Colorado and Florida.
- Local law. Cities and counties add requirements. None are covered here.
- Every utility in every state. Our reading covered water and wastewater in California, Massachusetts and Texas, and gas and electricity in Maryland and New York. Other utilities in those five states are not covered here.
- Later amendments. California figures are from the enrolled text of SB 7 as passed in 2016. We did not confirm later amendments. Virginia's section has a revised version that takes effect July 1, 2027. The Illinois text was read from a legal publisher's copy because the legislature's page did not load for us. The link goes to the legislature's page.
- Commission orders and guidance. Utility commissions in Texas, North Carolina, Maryland and New York publish forms and orders beyond the rule text.
What should an operator check before billing?
- Find the state statute and any commission rule, and read the definitions first. "Submetering" and "allocation" are defined differently from state to state.
- Check city and county ordinances for the property address.
- Confirm the lease states each utility billed, the method, and every fee.
- Compare your formula to the methods the rule lists, including any required common-area deduction.
- Confirm fee and late-charge amounts against the caps.
- Check whether the program must be registered or approved, and by whom.
- Keep the utility bills and calculations that support each resident bill for as long as the rule requires.
Method and sources
Each state row was written from the linked text, read in November 2026. Where an official legislature site was not readable, we used the Cornell Legal Information Institute copy of the regulation (Texas and New York) and linked to it. The historical comparison comes from Table ES.1.12 of the 2004 national study.
- Arizona: A.R.S. 33-1314.01, Arizona Legislature.
- California: SB 7, enrolled text, 2015-16 session, California Legislature.
- Delaware: Title 25, Chapter 53, Delaware Code Online.
- Illinois: 765 ILCS 740/5, Illinois General Assembly.
- Maryland: Public Utilities Article 7-303, Maryland General Assembly.
- Massachusetts: M.G.L. c. 186, s. 22, Massachusetts Legislature.
- New York: 16 NYCRR 96.1 and 96.2, Cornell Legal Information Institute.
- North Carolina: G.S. 42-42.1 and G.S. 62-110, North Carolina General Assembly.
- Oregon: ORS Chapter 90, section 90.315, Oregon Legislature.
- Texas: 16 TAC 24.277 and 16 TAC 24.281, Cornell Legal Information Institute.
- Virginia: Va. Code 55.1-1212, Virginia Legislative Information System.
- Historical table: Mayer and others, National Multiple Family Submetering and Allocation Billing Program Study, 2004, hosted by East Bay Municipal Utility District.
How AirBills helps
AirBills supports RUBS by square footage, occupancy or rooms, true submeter billing, and hybrids of the two, with rules set per property. That lets a portfolio apply a different method, formula and fee in each state and keep the invoices and calculations behind every resident bill in one place. See how it works for multifamily operators.